The A-16II Personal Mixer is a 16-channel stereo digital mixer designed to allow performers to create custom monitor mixes on stage or in the studio. The stereo output on the A-16II can drive in-ear monitors (IEMs) or headphones. Its intuitive interface lets a performer quickly modify a mix without distracting from the primary job at hand—performing live or in the studio.
A-16II mixers are known as the industry standard worldwide, and for good reasons: they’re robust, simple to use, and sound great. Just connect an A-16II to an analog input module or digital console card to start a system. It's that easy.


  • Audio Output 1/4-inch TRS stereo, headphone or line level
  • Line/Headphone TRS Output Tip: Audio Left; Ring: Audio Right; Sleeve: Ground 
  • Auto-detects mono plugs
  • A-Net Input/Output 1 A-Net input, 1 A-Net output; Category 5 (RJ45 connector)
  • Digital to Analog Conversion Bit Depth 24 bit
  • Signal to Noise Ratio (Referenced to 0dB) -103dB
  • Latency <0.880 msec (measured from analog input to analog output)
  • Pro16 A-Net Uses unshielded Cat-5e UTP (or better) cable; maximum 500ft (150m) between devices
  • Tone Controls Treble +/-12dB at 9kHz shelving
  • Bass +/-12dB at 160Hz shelving
  • Maximum Levels (RMS) Line/Headphone outs: 1.0 watt at 100 ohms