CROWN I-TECH 4X3500HD

Description

The Crown Audio I-T4x3500HD Pro Power Amplifier delivers 1900 watts per channel into 8 ohms, 2000 watts per channel into 4 ohms and a massive 4000 watts into 4 ohms bridged with all channels driven at full bandwidth, all from an amplifier that's just two rack spaces high. This power-to-size ratio is made possible by Crown's exclusive DriveCore amplifier integrated circuit chip. The DriveCore IC combines the amplifier driver stage and the power output stage (along with additional audio-signal functions) to dramatically reduce overall size and power-consumption requirements and yield energy-efficient operation that conforms to Harman International's GreenEdge environmental initiative.

Specification:-

  • Channels 4 Inputs (Analog, AES 3, VDrive or Cobranet) routable to any of the four outputs
  • Sensitivity Adjustable in 0.1dB increments from 1.28v to 8v
  • Rated Power Output 2ohms @ 2000w, 35000w 20ms Burst
  • 4ohms @ 2000w, 35000w, 20ms Burst
  • 8ohms @ 1500w, 1900w, 20ms Burst
  • Signal to Noise Ratio >-112dB (below rated power 20Hz to 20kHz, A Weighted)
  • Total Harmonic Distortion (THD) 0.35% (full rated power, 20 Hz to 20kHz)
  • Intermodulation Distortion 0.1% (from 0dB down to -40dB)
  • Frequency Response +/-0.25db (at 1Winto 4/8 ohms)
  • Crosstalk >80db (below rated power 20Hz to 1kHz)
  • Common Mode Rejection >80db Typical (20Hz to 1Khz)
  • Dimension ( H x W x D) 3.3 x 19 x 16.95" / 8.38 x 48.26 x 43.0 cm
  • Weight 29 lbs (13.2kg)